太仓Fully automatic die cutting machine use method detailed!

Automatic die cutting machine is a common printing equipment, widely used in packaging, printing and other industries, it can automatically complete the process of die cutting, improve production efficiency, reduce labor intensity. The following will introduce the use of automatic die-cutting machine in detail.

1. Prepare the device

First of all, it is necessary to check whether the equipment of the automatic die-cutting machine is in good condition, such as power supply, transmission system, lubrication system, etc. For the lubrication system, it is necessary to ensure its normal operation to ensure the smooth operation of the equipment. In addition, it is also necessary to check the wear of the die cutting blade, if it has been seriously worn, it needs to be replaced in time.

2. Obtain materials

Before using the automatic die-cutting machine, it is necessary to prepare the die-cutting materials, such as paper, film, etc. According to the actual needs, the material is cut to the appropriate size, and ensure that its quality meets the requirements.

3. Adjust the die cutting machine Settings

The automatic die cutting machine can be adjusted according to different needs to adapt to different die cutting tasks. First of all, the position and pressure of the die cutting blade need to be adjusted to ensure the accuracy and quality of the cutting. In addition, it is necessary to set the appropriate feeding speed and pressure to ensure the smooth feeding and cutting of materials. In the process of setting and adjusting, you can refer to the manual of the device, or adjust according to experience.

4. Start the die cutting task

After the adjustment is complete, you can start the die cutting task. Place the material to be die-cut on the feed table and ensure that the material is flat and does not wrinkle or fold. Start the equipment, at this time the automatic die-cutting machine will automatically send the material into the die-cutting area, and cut in accordance with the set specifications. In the whole process of die cutting, it is necessary to check the wear of the blade regularly and replace it in time.

5. Monitor and adjust

During the die cutting process, the equipment needs to be monitored and adjusted to ensure the quality and efficiency of the cutting. The cleanliness of the cutting area can be checked regularly to avoid the accumulation of paper scraps or waste affecting the cutting quality. In addition, you can judge whether the blade needs to be worn or adjusted by observing the cutting effect and auditory feedback during the die cutting process.

6. Storage and maintenance

After using a fully automatic die cutter, the equipment needs to be cleaned and stored and maintained. The cutting area can be cleared of paper scraps and scrap, and various parts of the equipment can be lubricated and maintained. If the device is not used for a long time, place it in a dry and ventilated place.

In SUMMARY:

The above is the use of automatic die-cutting machine. Through the use of automatic die-cutting machine, can improve the production efficiency, reduce the labor intensity of workers. However, in the use of automatic die cutting machine need to pay attention to safety, should be strictly in accordance with the equipment instruction manual to operate, and timely maintenance and maintenance, in order to extend the service life of the equipment.