安徽Three beam and four columns hydraulic press 300 tons hydraulic press

Three beam four column hydraulic press features:

Three beam and four column structure, economical and practical, hydraulic control using cartridge valve integrated system, reduce leakage point, reliable action, long service life, can achieve two kinds of forming process of fixed pressure and fixed range, with the function of rolling, working pressure stroke can be adjusted within the specified range, the use of button centralized control, can achieve manual, semi-automatic, automatic three modes of operation.

1, can be customized hydraulic press various types of lower cylinder

2, blanking buffer device

3, PLC touch screen control shunt

4, fast stroke filling device

5, 20T-- 1000T can be customized according to customer requirements

※ Three beam four column hydraulic press functions:

This series of hydraulic press is suitable for the pressing process of plastic materials, such as stamping, bending, flanging thin drawing, etc. It can also be engaged in correction, pressing, plastic products and powder products.

Scope of application of three beam and four columns hydraulic press: (die casting edge cutting machine, hydraulic press, oil press, die casting edge punching machine, hydraulic edge cutting machine, edge cutting machine, aluminum products edge punching machine, aluminum magnesium products edge cutting machine)

This series of hydraulic press is all kinds of aluminum, magnesium alloy die-casting products of raw edge punching and shaping, plastic products cutting; It is also suitable for the forming of plastic materials such as sheet metal blanking, stretching, etc. It is an upgrade product of TM106 ordinary type, using advanced hydraulic circuit of child and mother cylinder. Whether it is noise, speed, power consumption, are better than ordinary hydraulic press is a new generation of high efficiency, high speed, high force, high environmental protection hydraulic press machine is widely used in the die casting industry.

Three beam four column hydraulic press product features:

1. The series of hydraulic machine tools with 2-20MPA liquid pressure as the power source, external three-phase AC380V 50HZ or three-phase AC220 60HZ AC power supply.

2. This series of equipment uses liquid as the medium to transfer energy, adopts advanced hydraulic circuit of the child and the mother cylinder, low oil temperature, empty stroke speed is above 150MM/ SEC, and the working speed is below 30MM/SEC

3. When the device is on standby, the noise does not exceed 75 decibels when sliding fast and moving up and down.

4. Using four-column three-plate structure, the vertical accuracy of the movable plate is controlled by four precision guide sleeves, and the parallel accuracy of any point of the lower working face and the upper working face is less than 0.1MM.

5. The press has a waste blowing assembly. And the center of the lower workbench is provided with a waste chute.

6. The position of punching bottom stop is generally controlled by pressure switch and position sensor.

7. With automatic counting function, split and semi-automatic control methods, manual can be pressed to stop the die in any travel range, equipped with an emergency rebound button, can also be equipped with infrared hand protection device

8. Pressure, stroke, punching speed, blowing time, closing height can be adjusted by customers, easy to operate;

9. The hydraulic system is built into the bottom of the oil tank, the appearance is clean and stable.