昆山JXB-650FQ non-standard laminating slitting machine

JXB-650FQ non-standard laminating slitting machine

According to the needs of customers can be multi-layer bonding waste and other functions

1. Technical parameters

Machine speed: 80m/min

Raw material z Large width: 650mm

Discharge diameter: 600 mm

Film diameter: 350mm

Winding diameter: 450mm

Voltage: 220V 50HZ

The main engine power is 2.2kw

Total power: 3kw

Raw material z Large aperture: 3"

Compressed air source: (0.4-0.6) Mpa (customer's own)

Standard slitting product z small width: 25MM

Host size: 2400*2000*1500mm

Weight: 1.5T

2. Discharge device

Discharge air expansion shaft (3 "key bar type air expansion shaft) 2 sets

Magnetic powder brake 25N (Zhejiang) 1 set

Release film magnetic powder brake 25N (Zhejiang) 1 set

Discharge tension control system (Zhejiang) 2 sets

Correction system (voltage correction) 1 set

3, continuation of the material bonding part

Adhesive roller ￠80 (polyamine grease) 1 set

Adhesive roll ￠80 (polyamine) 1 set

Aluminum guide roller (surface hard oxygen treatment) 1 set

Pneumatic roller up and down system can be adjusted 1 set

Electronic counter (Zhejiang) 1 set

Release film tensioning adjustment system 1 set

4. Take-up part

1 set of incoming air expansion shaft (3 "key bar type air expansion shaft)

Magnetic powder clutch 25N (Zhejiang) 1 set

Receiving tension control system (Zhejiang) 2 sets

Main motor (Shanghai) 1 set

Main motor inverter (Shenzhen) 1 set

Take-up shaft pneumatic up and down device (lift, drop, support) 1 set

5. 1 set of switchboard control box

6. Electric control panel 1 set

7, the main functions of the machine

Frequency conversion speed regulation, easier operation, more accurate control.

Central winding and rewinding of double receiving shaft.

Double feed magnetic powder tension independent control, can be simultaneously winding, can also be used alone.

The electronic meter meter has automatic meter setting length and automatic stopping.